Freitag, 20. Januar 2012

booting old freecom firmware

+FLASH configuration checksum error or invalid key                                   
                                                                                     
Network NOT initialized!                                                             
 Press FSG Emergency Button during power up to initialize network                    
                                                                                     
RedBoot(tm) bootstrap and debug environment [ROM]                                    
Red Hat certified release, version 1.94 - built 11:47:48, Jun 10 2005                
                                                                                     
Platform: Freecom Storage  Gateway (FSG) (XScale) BE                                 
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.                             
                                                                                     
RAM: 0x00000000-0x04000000, 0x0001db58-0x03fd1000 available                          
FLASH: 0x50000000 - 0x50400000, 32 blocks of 0x00020000 bytes each.                  
RedBoot> fis load kern2                                                              
RedBoot> exec -c "console=ttyS0,115200 root=/dev/hda2
mem=64M@0x00000000"      
      
Using base address 0x00700000 and length 0x00180000                                  
Uncompressing Linux...................................................................
Linux version 2.6.18 (root@theszlinux64) (gcc version 3.4.4 (release) (CodeSourcery A7
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE), cr=000039ff               
Machine: FSG3 - Freecom Storage Gateway                                              
Memory policy: ECC disabled, Data cache writeback                                    
CPU0: D VIVT undefined 5 cache                                                       
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets                 
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets                 
Built 1 zonelists.  Total pages: 16384                                               
Kernel command line: console=ttyS0,115200 root=/dev/sda2 mem=64M@0x00000000          
PID hash table entries: 512 (order: 9, 2048 bytes)                                   
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)                        
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)                         
Memory: 64MB = 64MB total                                                            
Memory: 61824KB available (2761K code, 220K data, 84K init)                          
Mount-cache hash table entries: 512                                                  
CPU: Testing write buffer coherency: ok                                              
NET: Registered protocol family 16                                                   
IXP4xx: Using 16MiB expansion bus window size                                        
PCI: IXP4xx is host                                                                  
PCI: IXP4xx Using direct access for memory space                                     
PCI: bus0: Fast back to back transfers disabled                                      
dmabounce: registered device 0000:00:0c.0 on pci bus                                 
dmabounce: registered device 0000:00:0e.0 on pci bus                                 
dmabounce: registered device 0000:00:0e.1 on pci bus                                 
dmabounce: registered device 0000:00:0e.2 on pci bus                                 
fsg3_map_irq: Mapped slot 1 pin 1 to IRQ 22                                          
fsg3_map_irq: Mapped slot 3 pin 1 to IRQ 23                                          
fsg3_map_irq: Mapped slot 3 pin 2 to IRQ 23                                          
fsg3_map_irq: Mapped slot 3 pin 3 to IRQ 23                                          
SCSI subsystem initialized                                                           
usbcore: registered new driver usbfs                                                 
usbcore: registered new driver hub                                                   
NET: Registered protocol family 2                                                    
IP route cache hash table entries: 512 (order: -1, 2048 bytes)                       
TCP established hash table entries: 2048 (order: 1, 8192 bytes)                      
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)                             
TCP: Hash tables configured (established 2048 bind 1024)                             
TCP reno registered                                                                  
NetWinder Floating Point Emulator V0.97 (double precision)                           
VFS: Disk quotas dquot_6.5.1                                                         
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)                           
NTFS driver 2.1.27 [Flags: R/O].                                                     
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.                                
Initializing Cryptographic API                                                       
io scheduler noop registered                                                         
io scheduler cfq registered (default)                                                
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled            
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale                        
serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale                        
PPP generic driver version 2.4.2                                                     
PPP Deflate Compression module registered                                            
PPP BSD Compression module registered                                                
PPP MPPE Compression module registered                                               
NET: Registered protocol family 24                                                   
PCI: enabling device 0000:00:0c.0 (0000 -> 0001)                                     
sata_via 0000:00:0c.0: routed to hard irq line 6                                     
ata1: PATA max UDMA/133 cmd 0x1420 ctl 0x142A bmdma 0x1400 irq 22                    
ata2: PATA max UDMA/133 cmd 0x1440 ctl 0x144A bmdma 0x1410 irq 22                    
ata3: PATA max UDMA/133 cmd 0x1430 ctl 0x143A bmdma 0x1408 irq 22                    
scsi0 : sata_via                                                                     
ATA: abnormal status 0x7F on port 0x1427                                             
scsi1 : sata_via                                                                     
ata2.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48                               
ata2.00: ata2: dev 0 multi count 0                                                   
ata2.00: configured for UDMA/133                                                     
scsi2 : sata_via                                                                     
ATA: abnormal status 0x7F on port 0x1437                                             
  Vendor: ATA       Model: Hitachi HDT72505  Rev: V56O                               
  Type:   Direct-Access                      ANSI SCSI revision: 05                  
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)                         
sda: Write Protect is off                                                            
SCSI device sda: drive cache: write back                                             
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)                         
sda: Write Protect is off                                                            
SCSI device sda: drive cache: write back                                             
 sda: sda1 sda2 sda3 sda4                                                            
sd 1:0:0:0: Attached scsi disk sda                                                   
IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank                            
 Intel/Sharp Extended Query Table at 0x0031                                          
Using buffer write method                                                            
cfi_cmdset_0001: Erase suspend on write enabled                                      
Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x3e0000           
RedBoot directory 0x503e0000(0x20000) native                                         
6 RedBoot partitions found on MTD device IXP4XX-Flash.0                              
Creating 6 MTD partitions on "IXP4XX-Flash.0":                                       
0x00000000-0x00040000 : "RedBoot"                                                    
0x00080000-0x00200000 : "kern1"                                                      
0x00200000-0x00380000 : "kern2"                                                      
0x003a0000-0x003c0000 : "microcode"                                                  
0x003c0000-0x003e0000 : "RedBoot config"                                             
FSG3-MAC for eth0: 00:01:db:00:a7:78                                                 
FSG3-MAC for eth1: 00:01:db:00:a7:79                                                 
0x003e0000-0x00400000 : "FIS directory"                                              
PCI: enabling device 0000:00:0e.2 (0140 -> 0142)                                     
ehci_hcd 0000:00:0e.2: EHCI Host Controller                                          
ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1                 
ehci_hcd 0000:00:0e.2: irq 23, io mem 0x48002000                                     
ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004                
usb usb1: configuration #1 chosen from 1 choice                                      
hub 1-0:1.0: USB hub found                                                           
hub 1-0:1.0: 5 ports detected                                                        
PCI: enabling device 0000:00:0e.0 (0140 -> 0142)                                     
ohci_hcd 0000:00:0e.0: OHCI Host Controller                                          
ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2                 
ohci_hcd 0000:00:0e.0: irq 23, io mem 0x48000000                                     
usb usb2: configuration #1 chosen from 1 choice                                      
hub 2-0:1.0: USB hub found                                                           
hub 2-0:1.0: 3 ports detected                                                        
PCI: enabling device 0000:00:0e.1 (0140 -> 0142)                                     
ohci_hcd 0000:00:0e.1: OHCI Host Controller                                          
ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3                 
ohci_hcd 0000:00:0e.1: irq 23, io mem 0x48001000                                     
usb usb3: configuration #1 chosen from 1 choice                                      
hub 3-0:1.0: USB hub found                                                           
hub 3-0:1.0: 2 ports detected                                                        
USB Universal Host Controller Interface driver v3.0                                  
usbcore: registered new driver usblp                                                 
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver                    
Initializing USB Mass Storage driver...                                              
usbcore: registered new driver usb-storage                                           
USB Mass Storage support registered.                                                 
i2c /dev entries driver                                                              
isl1208 0-006f: chip found, driver version 0.2                                       
isl1208 0-006f: rtc intf: dev (254:0)                                                
isl1208 0-006f: rtc core: registered isl1208 as rtc0                                 
hwmon-vid: Unknown VRM version of your CPU                                           
LEDs: registered SYNC switch on IRQ21                                                
LEDs: registered RESET switch on IRQ26                                               
LEDs: registered UNPLUG switch on IRQ27                                              
Registered led device: sync                                                          
Registered led device: ring                                                          
Registered led device: USB                                                           
Registered led device: SATA                                                          
Registered led device: WAN                                                           
Registered led device: WLAN                                                          
TCP bic registered                                                                   
NET: Registered protocol family 1                                                    
NET: Registered protocol family 17                                                   
Bridge firewalling registered                                                        
isl1208 0-006f: hctosys: invalid date/time                                           
ReiserFS: sda2: found reiserfs format "3.6" with standard journal                    
ReiserFS: sda2: using ordered data mode                                              
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max t0
ReiserFS: sda2: checking transaction log (sda2)                                      
ReiserFS: sda2: replayed 9 transactions in 0 seconds                                 
ReiserFS: sda2: Using r5 hash to sort names                                          
VFS: Mounted root (reiserfs filesystem).                                             
Freeing init memory: 84K                                                             
mount: Mounting none on /ramdisk failed: Invalid argument                            
ixp400: module license 'unspecified' taints kernel.                                  
ixp400_eth: Initializing IXP400 NPE Ethernet driver software v. 1.5.1a               
ixp400_eth: CPU clock speed (approx) = 266 MHz                                       
ixp400_eth: ethernet 0 using NPEB and the PHY at address 5                           
ixp400_eth: ethernet 1 using NPEC and the PHY at address 4                           
ixp400_eth: Use MAC address 00:01:db:00:a7:78 for port 0                             
ixp400_eth: Use MAC address 00:01:db:00:a7:79 for port 1                             
Setting up swapspace version 1, size = 104853504 bytes                               
Adding 102392k swap on /dev/sda3.  Priority:-1 extents:1 across:102392k              
fuse init (API version 7.8)                                                          
fuse distribution version: 2.6.1                                                     
kobject_add failed for fs with -EEXIST, don't try to register things with the same na.
insmod: cannot insert `/root/fuse.ko': File exists (-1): File exists                 
ReiserFS: sda4: found reiserfs format "3.6" with standard journal                    
                                                                                     
                                                                                     
ReiserFS: sda4: using ordered data mode                                              
ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max t0
ReiserFS: sda4: checking transaction log (sda4)                                      
ReiserFS: sda4: replayed 6 transactions in 1 seconds                                 
ReiserFS: sda4: Using r5 hash to sort names                                          
quotaon: Cannot find quota file on /home [/dev/sda4] to turn quotas on/off.          
Starting syslogd/klogd.                                                              
Starting network.                                                                    
device lan0 entered promiscuous mode                                                 
device eth1 entered promiscuous mode                                                 
eth0: port 2(eth1) entering learning state                                           
eth0: port 1(lan0) entering learning state                                           
eth0: topology change detected, propagating                                          
eth0: port 2(eth1) entering forwarding state                                         
eth0: topology change detected, propagating                                          
eth0: port 1(lan0) entering forwarding state                                         
eth0: port 2(eth1) entering disabled state                                           
Starting samba.                                                                      
Starting HTTP server with options:                                                   
Starting SSH server.                                                                 
Starting Fan deamon.                                                                 
Starting flush daemon -> spin down after 30 min.                                     
Starting Optware.   

Keine Kommentare:

Kommentar veröffentlichen