Samstag, 21. Januar 2012

freecom bootscreen


=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.01.21 20:02:46 =~=~=~=~=~=~=~=~=~=~=~=
#+
Network NOT initialized!
 Press FSG Emergency Button during power up to initialize network

RedBoot(tm) bootstrap and debug environment [ROM]
Red Hat certified release, version 1.94 - built 11:47:48, Jun 10 2005

Platform: Freecom Storage  Gateway (FSG) (XScale) BE
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

RAM: 0x00000000-0x04000000, 0x0001db58-0x03fd1000 available
FLASH: 0x50000000 - 0x50400000, 32 blocks of 0x00020000 bytes each.
== Executing boot script in 1.000 seconds - enter ^C to abort
RedBoot> fis load kern1
RedBoot> exec -c "console=ttyS0,115200 root=/dev/hda1 mem=64M@0x00000000"
Using base address 0x00700000 and length 0x00180000
Uncompressing Linux................................................................................................. done, booting the kernel.
Linux version 2.6.18 (root@theszlinux64) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #161 Tue Jul 17 12:37:52 UTC 2007
CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE), cr=000039ff
Machine: FSG3 - Freecom Storage Gateway
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists.  Total pages: 16384
Kernel command line: console=ttyS0,115200 root=/dev/sda1 mem=64M@0x00000000
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 61824KB available (2761K code, 220K data, 84K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
IXP4xx: Using 16MiB expansion bus window size
PCI: IXP4xx is host
PCI: IXP4xx Using direct access for memory space
PCI: bus0: Fast back to back transfers disabled
dmabounce: registered device 0000:00:0c.0 on pci bus
dmabounce: registered device 0000:00:0d.0 on pci bus
dmabounce: registered device 0000:00:0e.0 on pci bus
dmabounce: registered device 0000:00:0e.1 on pci bus
dmabounce: registered device 0000:00:0e.2 on pci bus
fsg3_map_irq: Mapped slot 1 pin 1 to IRQ 22
fsg3_map_irq: Mapped slot 2 pin 1 to IRQ 24
fsg3_map_irq: Mapped slot 3 pin 1 to IRQ 23
fsg3_map_irq: Mapped slot 3 pin 2 to IRQ 23
fsg3_map_irq: Mapped slot 3 pin 3 to IRQ 23
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.27 [Flags: R/O].
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale
serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PCI: enabling device 0000:00:0c.0 (0000 -> 0001)
sata_via 0000:00:0c.0: routed to hard irq line 6
ata1: PATA max UDMA/133 cmd 0x1420 ctl 0x142A bmdma 0x1400 irq 22
ata2: PATA max UDMA/133 cmd 0x1440 ctl 0x144A bmdma 0x1410 irq 22
ata3: PATA max UDMA/133 cmd 0x1430 ctl 0x143A bmdma 0x1408 irq 22
scsi0 : sata_via
ATA: abnormal status 0x7F on port 0x1427
scsi1 : sata_via
ata2: port is slow to respond, please be patient
ata2.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 
ata2.00: ata2: dev 0 multi count 0
ata2.00: configured for UDMA/133
scsi2 : sata_via
ATA: abnormal status 0x7F on port 0x1437
  Vendor: ATA       Model: Hitachi HDT72505  Rev: V56O
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: Attached scsi disk sda
IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x3e0000
RedBoot directory 0x503e0000(0x20000) native
5 RedBoot partitions found on MTD device IXP4XX-Flash.0
Creating 5 MTD partitions on "IXP4XX-Flash.0":
0x00000000-0x00040000 : "RedBoot"
0x00080000-0x00200000 : "kern1"
0x00200000-0x00380000 : "kern2"
0x003c0000-0x003e0000 : "RedBoot config"
FSG3-MAC for eth0: 00:01:db:00:a6:02
FSG3-MAC for eth1: 00:01:db:00:a6:03
0x003e0000-0x00400000 : "FIS directory"
PCI: enabling device 0000:00:0e.2 (0140 -> 0142)
ehci_hcd 0000:00:0e.2: EHCI Host Controller
ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0e.2: irq 23, io mem 0x48022000
ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
PCI: enabling device 0000:00:0e.0 (0140 -> 0142)
ohci_hcd 0000:00:0e.0: OHCI Host Controller
ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0e.0: irq 23, io mem 0x48020000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
PCI: enabling device 0000:00:0e.1 (0140 -> 0142)
ohci_hcd 0000:00:0e.1: OHCI Host Controller
ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:0e.1: irq 23, io mem 0x48021000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
isl1208 0-006f: chip found, driver version 0.2
isl1208 0-006f: rtc intf: dev (254:0)
isl1208 0-006f: rtc core: registered isl1208 as rtc0
hwmon-vid: Unknown VRM version of your CPU
LEDs: registered SYNC switch on IRQ21
LEDs: registered RESET switch on IRQ26
LEDs: registered UNPLUG switch on IRQ27
Registered led device: sync
Registered led device: ring
Registered led device: USB
Registered led device: SATA
Registered led device: WAN
Registered led device: WLAN
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
isl1208 0-006f: setting the system clock to 2012-01-20 23:02:27 (1327100547)
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: replayed 3 transactions in 0 seconds
ReiserFS: sda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem).
Freeing init memory: 84K
BUG: warning at arch/arm/mm/consistent.c:363/dma_free_coherent()
mount: Mounting none on /ramdisk failed: Invalid argument
ixp400: module license 'unspecified' taints kernel.
ixp400_eth: Initializing IXP400 NPE Ethernet driver software v. 1.5.1a 
ixp400_eth: CPU clock speed (approx) = 266 MHz
ixp400_eth: ethernet 0 using NPEB and the PHY at address 5
ixp400_eth: ethernet 1 using NPEC and the PHY at address 4
ixp400_eth: Use MAC address 00:01:db:00:a6:02 for port 0
ixp400_eth: Use MAC address 00:01:db:00:a6:03 for port 1
ip_tables: (C) 2000-2006 Netfilter Core Team
ip_conntrack version 2.4 (512 buckets, 4096 max) - 204 bytes per conntrack
Setting up swapspace version 1, size = 74022912 bytes
Adding 72284k swap on /dev/sda3.  Priority:-1 extents:1 across:72284k
fuse init (API version 7.8)
fuse distribution version: 2.6.1
kobject_add failed for fs with -EEXIST, don't try to register things with the same name in the same directory.
insmod: cannot insert `/root/fuse.ko': File exists (-1): File exists
ReiserFS: sda4: found reiserfs format "3.6" with standard journal
ReiserFS: sda4: using ordered data mode
ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda4: checking transaction log (sda4)
ReiserFS: sda4: replayed 3 transactions in 0 seconds
ReiserFS: sda4: Using r5 hash to sort names
quotaon: Cannot find quota file on /home [/dev/sda4] to turn quotas on/off.
Starting network.
device lan0 entered promiscuous mode
eth0: port 1(lan0) entering learning state
eth0: topology change detected, propagating
eth0: port 1(lan0) entering forwarding state
Starting network routing.
Using 192.168.1.0/24 on LAN ports.
Warning: WAN port IP not set.
Starting DHCP client on eth1.
Starting DHCP server and DNS service.
Starting samba.
Starting HTTP server with options: 
httpd[558]: [notice] Apache/1.3.33 (Unix) mod_ssl/2.8.22 OpenSSL/0.9.7c PHP/4.4.1 configured -- resuming normal operations

httpd[558]: [notice] Accept mutex: sysvsem (Default: sysvsem)

Starting Fan deamon.
Starting flush daemon -> spin down after 30 min.
/ # 7#��#�h#�#

Keine Kommentare:

Kommentar veröffentlichen